3M™ Anisotropic Conductive Film Adhesive 7303, 2.5 mm x 35 m Roll

262787 MFG #: 051115-52486
$327.14 / EACH
  • Adhesive Material: 74 micron Epoxy/Acrylate Blend
  • Color: Yellow
  • Length: 35, 35 m Roll
  • Maximum Operating Temperature: 302
  • Minimum Operating Temperature: 275
  • Temperature Rating: 275 to 302 deg F
  • Type: Anisotropic Z-Axis
  • Width: 2.5, 2.5 mm
The unbonded film is slightly tacky at room temperature and consists of a thermoset-elastomer and thermoplastic adhesive matrix randomly loaded with conductive particles. These particles allow interconnection of circuit lines through the adhesive thickness, but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. Soft conductive particles are preferred when bonding to fragile substrates such as ITO on glass, as they deform against hard surfaces, but may also be used for other substrate types. 3M™ ACF 7379 may be used to bond a flexible printed circuit to glass-based devices such as displays or to another flexible printed circuit. Standard Lead Time: 14 Calendar Days
  • Features
  • Epoxy/acrylate blend adhesive system filled with 43 micron silver coated glass beads
  • Gold/copper on polyimide, gold/copper on polyester, silver ink on polyester flex
  • 100 micron polyester coated kraft with silicone release liner
  • It is slightly tacky at room temperature and cures at modest bonding temperature and pressure
  • Heat cure
  • Thermoset low temperature cure
  • Tacky at room temperature
  • Good thermal stability
  • Frozen storage
  • Thermo compression bonding method
  • Flex to PCB, flex to flex connection