#25 CARB TIP 6" AIRCRAFT
088557
MFG #: 61225
$25.25
/ EACH
- Brand: Hannibal
- Cutting Depth: 1/7/2008, 1-7/8
- Cutting Edge Material: Carbide
- Drill Size - Decimal Inch: 0.1495
- Drill Size - Wire: #25
- Flute Length: 1/7/2008, 1-7/8
- Flute Type: Spiral
- Letter/Wire Size: #25
- Material: Steel
- Overall Length: 6
- Point Angle: 135, 135 deg
- Point Type: Split
- Series: 610WLS
Hannibal Aircraft Extension Drill, Series: 610WLS, #25 Drill Size - Wire, 0.1495 in Drill Size - Decimal Inch, 6 in Overall Length, 1-7/8 in Cutting Depth, Spiral Flute, 1-7/8 in Flute Length, 135 deg Point, Split Point, Carbide Cutting Edge, Steel, Applicable Materials: Cast Iron and Non-Ferrous Materials
- Features
- Drills are end cutting tools used to produce holes when rapid removal of material is desired
- Twist drills are generally effective in holes up to 3 tool diameters deep - peck cycles should be used for deeper holes to achieve better chip evacuation
- Smooth flutes for effective chip flow
- Precision ground to insure concentricity of tip and body
- Feeds should be light to medium
- 0.003 in lip height tolerance
- +/-5 deg included angle tolerance
- -0.007 in tool diameter tolerance
- ASME/ANSI B94.11M|ISO 9001|NAS 907|USCTI Standards|PROP65: This product can expose you to chemicals including cobalt, which is known to the State of California to cause cancer. Carbide dust is a pulmonary irritant. Use proper ventilation & personal protection. More info: www.P65Warnings.ca.gov