.7500 CARBIDE TIP REAMER

103017 MFG #: 041624
$171.70 / EACH
  • Brand: Hannibal
  • Diameter: 3/4, 4-Mar
  • Finish: Polished
  • Flute Length: 2/1/2002, 2-1/2
  • Flute Type: Straight
  • Material: Carbide Tip/Steel Body
  • Number of Flutes: 6
  • Overall Length: 9/1/2002, 9-1/2
  • Series: 416F
  • Shank Diameter: 0.6245
  • Shank Type: Straight
Hannibal Chucking Reamer, Series: 416F, 3/4 in Diameter, 9-1/2 in Overall Length, Straight Shank, 0.6245 in Shank Diameter, 6 Flutes, Straight Flute, 2-1/2 in Flute Length, Carbide Tip/Steel Body, Polished, Applicable Materials: Non-Ferrous Metal
QTY
  • Features
  • The reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Flute coolant outlets for reaming through holes as chips are flushed forward through the hole being reamed
  • Improves hole finish and permits higher feeds and speeds with longer tool life
  • 2-1/2 in L carbide
  • The standard 45 deg chamfer angle provides effective cutting action for most materials
  • -0.0015 in shank diameter tolerance
  • 0.0003 in tool diameter tolerance
  • Carbide tipped reamers are especially appropriate for close tolerance reaming - because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt
  • The reamer is an end cutting tool, cutting only on the chamfer's edge at the outside diameter of the preformed hole
  • Geometry and carbide grade appropriate for material being machined
  • Higher feeds and speeds due to heat resistant cutting edge - reduces machine cycle time per part
  • Consistent quality - maintains hole size and surface finish far longer
  • Longer tool life - reduces down time for tool changes
  • Exceptional performance and tool life using material specific reamer technology and coolant fed capabilities - maximizes feeds and speeds
  • Carbide tip brazed to tough hardened alloy steel body
  • ASME/ANSI B94.2|ISO 9001|NAS 897|USCTI Standards|PROP65: This product can expose you to chemicals including cobalt, which is known to the State of California to cause cancer. Carbide dust is a pulmonary irritant. Use proper ventilation & personal protection. More info: www.P65Warnings.ca.gov