3M™ Sandblast Stencil Patch Kit 55, 5 in x multiple length rolls, 20 lb per case, Single Linered

258488 MFG #: 048011-53970
$104.06 / EACH
  • Adhesion Strength: 80, 80 oz/in
  • Adhesive Material: Thermosetting Pressure Sensitive Rubber
  • Backing Material: Polyester Film/Mat
  • Dielectric Strength: 6000 V
  • Maximum Operating Temperature: 85
  • Minimum Operating Temperature: 50
  • Brand: 3M™
  • Specifications Met: ASTM E162/ASTM E662/FMVSS-302/D1000/Bombardier SMP 800-C
  • Temperature Rating: 50 to 85 deg F
  • Tensile Strength: 35, 35 in-lb
  • Thickness: 7.5, 7.5 mil
  • Width: 5

Recommended Application

  • Useful as patch material during the sandblasting process
  • Useful as patch material during the sandblasting process
  • Helps protect granite, marble, concrete, wood and other stone surfaces during blasting operations
  • Helps protect granite, marble, concrete, wood and other stone surfaces during blasting operations
  • Small lettering, media blasting, edge and surface protection
  • Intricate designs

Helpful Tips for Sandblasting Success
The stone surface should be clean, dry and at a room temperature of 50° to 85°F (10° to 29°C) before applying the filler. Brush the well mixed filler evenly onto the stone surface. Let dry in a well ventilated area until the “gloss” on the surface has disappeared. Then apply the stencil according to directions. After blasting, remove the stencil as soon as possible. If any cleanup is necessary, use stencil scraps or masking tape to pull leftover filler from the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and to hold the stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 for rough and irregular surfaces.

QTY
  • Features
  • Multi-layer construction reduces total application and removal costs versus single layer protection
  • Optically transparent polyester film provides glass like appearance
  • Durable top coat layer prevents light scratches caused by installation, wiping, cleaning or abrasion
  • Optimized inter layer adhesive provides firm, adequate adhesion yet fast and easy removal
  • Blocks more than 98% of UV light that can degrade plastics and fabrics
  • ASTM D1000