3M™ Sandblast Stencil Patch Kit 55, 5 in x multiple length rolls, 20 lb per case, Double Linered

258489 MFG #: 051115-24965
$104.06 / EACH
  • Adhesion Strength: 80, 80 in-oz
  • Adhesive Material: Thermosetting Pressure Sensitive Rubber
  • Backing Material: Polyester Film/Mat
  • Dielectric Strength: 6000 V
  • Brand: 3M™
  • Specifications Met: ASTM D1000
  • Tensile Strength: 35, 35 in-lb
  • Thickness: 7.5
  • Width: 5

Recommended Application

  • Useful as patch material during the sandblasting process
  • Useful as patch material during the sandblasting process
  • Helps protect granite, marble, concrete, wood and other stone surfaces during blasting operations
  • Helps protect granite, marble, concrete, wood and other stone surfaces during blasting operations
  • Small lettering, media blasting, edge and surface protection
  • Intricate designs

Helpful Tips for Sandblasting Success
The stone surface should be clean, dry and at a room temperature of 50° to 85°F (10° to 29°C) before applying the filler. Brush the well mixed filler evenly onto the stone surface. Let dry in a well ventilated area until the “gloss” on the surface has disappeared. Then apply the stencil according to directions. After blasting, remove the stencil as soon as possible. If any cleanup is necessary, use stencil scraps or masking tape to pull leftover filler from the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and to hold the stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 for rough and irregular surfaces.

QTY
  • Features
  • ASTM D1000