3M™ Scotch-Weld™ Acrylic Adhesive DP805, Pale Yellow, 200 mL Duo-Pak, 12/case

259669 MFG #: 021200-87828
$136.85 / EACH
  • Application Time: 3 to 4
  • Base Type: Acrylic
  • Color: Off-White
  • Container Size: 200
  • Container Type: Duo-Pak Tube
  • Curing Time: 8 to 24 hr at 72 deg F
  • Flammability Rating: 3
  • Flash Point: 50
  • For Use On: Plastic, Metal, Glass and Ceramic
  • Form: Flowable Liquid
  • Functional Cure: 10
  • Mixing Ratio: 0.042361111, 0.0423611111111111, 1:1
  • Net Weight: Base: 8.4 lb/gal/Accelerator: 8.1 lb/gal
  • Odor/Scent: Acrylic/Pungent
  • Setting Time: 10
  • Shear Strength: 3500
  • Specific Gravity: 0.99
  • Temperature Range: 72
  • Temperature Rating: 72
  • Viscosity Rating: 110000
  • VOC Content: 4.9 to 772
  • Work Life: 3 to 4

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Plastics and Metals
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Acrylic Adhesive DP805 also bonds metals and most other plastics.

Recommended Applications

  • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
  • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
  • Bonding plastics, composites and powder coats to metal
  • Typically used for larger parts where a longer open time is needed for assembly

The mix ratio for 3M™ Scotch-Weld™ Acrylic Adhesive DP805 is 1:1 for quick, precise dispensing. With an applied 3 minute work life there is some opportunity for positioning and adjustments after the adhesive is applied. This adhesive reaches handling strength in approximately 140 minutes and is fully cured in 48 hours (at 72°F/22°C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part methyl methacrylate adhesives (MMA) that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. Acrylic glues have several features that make them easier to use, including a faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

  • Features
  • Resists many chemicals, water, humidity and corrosion
  • Medium viscosity allows controlled dispensing
  • 3 min worklife with 10 min handling strength
  • Strong adhesive can replace screws, rivets and welding
  • OSHA 29 CFR 1910.1200