3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS, Tan, 400 mL Duo-Pak, 6/case

261522 MFG #: 021200-49083
$220.99 / EACH
  • Application Time: 10
  • Base Type: Acrylic
  • Curing Time: 8 to 24
  • Flammability Rating: 1
  • Flash Point: Part A: 216 deg F/Part B: >200 deg F
  • Mixing Ratio: 1:01, 1:1
  • Setting Time: 10
  • Shear Strength: 4000 lb/sq-in at 72 deg F
  • Temperature Rating: 40
  • Viscosity Rating: 95000
  • Bonds To: Ceramic, Glass, Metal, ABS, PVC, Acrylic, High Performance Nylon, Wood, Hardboard
  • Color: Part A: White/Part B: Green
  • Container Size: 400
  • Container Type: Dual Cartridge, Dual-Cartridge
  • Form: Paste
  • Odor/Scent: Part A: Low/Part B: Slight Fragrance
  • Specific Gravity: 1.07
  • Type: 2-Part Low Odor Non-Sag
  • VOC Content: Part A: 349 g/L/Part B: 319 g/L
  • Work Life: 10

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.

Recommended Applications

  • Sporting goods (metal to metal, metal to plastic bonding)
  • Appliance manufacturing (metal to metal, metal to glass)
  • Electronic casing assembly

10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.

Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

QTY
  • Features
  • Delivers non-sag formulation so adhesive stays where applied
  • Provides high shear and peel strength and is toughened for impact resistance
  • 10 min work life and 20 min handling strength
  • Bonds oily metals with minimal surface preparation
  • OSHA 29 CFR 1910.1200