3M™ Anisotropic Conductive Film Adhesive 5363, 4.0 mm x 50 m, 20/Case

264678 MFG #: 051115-52555
$755.53 / EACH
  • Adhesive Material: 40 micron Thermoset Epoxy
  • Brand: 3M™
  • Color: Brown
  • Length: 50, 50 m Roll
  • Maximum Operating Temperature: 410
  • Minimum Operating Temperature: 383
  • Temperature Rating: 383 to 410 deg F
  • Type: Anisotropic
  • Width: 4, 4 mm
Thermoset-thermoplastic adhesive matrix randomly loaded with conductive particles. These particles allow interconnection of circuit lines through the adhesive thickness, but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. Hard conductive particles are preferred for copper traces, as they embed into traces for good electrical performance. 3M™ ACF 5363 may be used to bond a flexible printed circuit to another flexible printed circuit or to a printed circuit board. Standard Lead Time: 14 Calendar Days
  • Features
  • Epoxy based adhesive system with 10 micron gold coated nickel particles
  • Thermo compression bonding method
  • Flex to PCB, flex to flex connection
  • Gold/copper on polyimide flex
  • 50 micron polyester film with silicone release liner
  • It is a heat bondable, electrically conductive adhesive film with excellent reliability
  • Heat cure
  • Fast bond time
  • Thermoset low temperature cure
  • Excellent chemical resistance
  • Highest thermal stability
  • Replaces solder for lead-free solution
  • Frozen storage